Drawing Deed Calls Into Autocad

Extended Data Draw: Draw geometry (hatches, mtext, inserts) based on values in extended data. Manager: Allows xdata management operations across a selection set of objects. Edit: Edits the MapWorks extended entity data on a single object.  Dockable palette automatically shows extended data when one object is selected. Image Process Symbols: Go straight from your GPS enabled camera to CAD!  Locates symbols representing GPS Photos (with EXIF data) directly from images.  Creates a hyperlink to the image, projects to drawing system, rotates to view (if bearing data exists), and more. Link Inspect: Shows linked images in a resizable preview window as you move the crosshair over objects (such as polyline house outlines) containing links. TMS Images: Builds insert-able images from TMS (Tile Map Service) servers.  Produce plan view maps, satellite imagery or terrain images. GPS Update: Select inserts with hyperlinks and updates the GPS Exif (geotagging information) in source images.  Adds GPS properties to images that never had geotag information. Plot Rasters: Plots multiple layouts to rasters at specified resolution and creates companion world files. Resolution: Change (lower) the resolution of a selection set of image while maintaining size and position. World: Inserts multiple TIF/JPG/PNG/SID images based on world files or creates a World TFW/JGW/PGW/SDW file from a selected image (even rotated). Other Tools Block: Scale/Rotate: Processes a selection set at their insertion points. Attr Flip/Move: Great for maintaining readability on labels. Elevate by Attr: Sets the elevation of inserts by the value of one of its attributes. Curves: Calculator: Dialog based tool to calculate all curve parameters based on two known values. Complement: Generates the complement for a selected arc. Controlled Fit: Generates a fit arc or circles through multiple points.  Toggle or control weights with interactive feedback of the curve results. Pnt, Pnt, Pnt: Draws an arc object though three picked points in any direction. Pnt, Tan, Tan: Draws an arc through a point with two selected tangent segments. Quick Fit: Draws a fit arc through multiple picked points along path. Rad, Pnt, Pnt: Generates an arc object from known endpoints and radius. Radius, Direction: Generates an arc object based on known Radius, Direction In/Out. Tangent: Draws a tangent arc from the endpoint of a selected line/polyline segment. Draw: Map Grid: Draws a map grid with optional lines/tics and labels. Network Buffer: Creates buffer polylines around line network. Point File: Draws the contents of an X,Y,Z ascii file as points. Polyline Midway: Generates a polyline midway between two selected polylines. Slope Lines: Draws three dimensional slope lines between two linear objects with optional slope arrows. Thiessen Polygons: Creates Thiessen polygons (Voronoi Diagram) from a selection of points and a boundary. Traverse: Draw polylines by distances and numerous angle options. Elevate: Pick Object: Quick change elevation by selecting objects with proper elevation. EPA SWMM: Import: Imports the plan view map section of a SWMM .INP file along with tables. Make Input: Makes Epa SWMM input file from selected named boundaries. Surface: Generates surfaces from z values in EPA SWMM Report file. Labels: Coordinate: Labels coordinates at picked points with user customizable block. Values update on regen if moved/copied, etc. Curve 1 Pick: Labels a curve at picked point on arc/polyarc segments. Curve 3 Points: Labels curve data based on any three picked points. Dir/Dist 1 Pick: Labels direction/distance with one pick on linear segment. Dir/Dist 2 Points: Labels direction & distance with two endpoint picks. Linear Objects: Labels direction/distance, curve parameters and area (if closed) on a selection set. Polyline Data: Labels area/perimeter data on a selection set of closed polylines. Legends: Generates (and updates) a symbol legend and/or linetype legend reflecting those objects actually used in the drawing.  The symbol legend can contain normal block inserts. Line: Best Fit: Creates a best fit line (using Linear Regression) through multiple points. Tangent: Draws a tangent line from the endpoint of a selected arc/polyarc segment. Linetypes: Quickly create symbolic linetypes (arrows, bullets, numbers, shapes, etc) or text based linetypes based on characters you enter. Map FileGDB: Import and Export *.GDB folders directly to/from CAD geometry (with extended data). Map Export: Export drawing geometry to several formats. ● Autodesk Breakline File (*.flt) ● Carlson SurvCADD Polyline File (*.pln) ● ESRI Generate Polyline File (*.gen) ● ESRI Shape File (*.shp) ● Golden Software Blanking/Boundary (*.bln) ● GeoJSON Open Standard (*.geojson) ● GPS Exchange Format (*.gpx) ● MapInfo Data Interchange Format (*.mif/mid) ● Moss/MX Genio String Files (*.mos) ● OpenGIS Simple Features Text (*.txt) Map Import: Import major formats produced by ESRI, civil applications and government agencies. This tool allows you to select multiple files and quickly import mapping information directly into your CAD drawing.  Our Import tool has been tested with massive files, including a 3GB SHP/DBF from a major city. • Autodesk Breakline File (*.flt) • Carlson SurvCADD Polyline File (*.pln) • ContourGPS Export Files (*.csv) • ESRI Generate Polyline File (*.gen;*.ung) • ESRI Shape File (*.shp) • GeoJSON Open Standard (*.geojson) • Geography Markup Language (*.gml) • Golden Software Blanking/Boundary (*.bln) • Google Earth KMZ/KML Files (*.kmz,*.kml) • GPS Exchange Format (*.gpx) • LandXML Industry Consortium (*.xml) • MapInfo Data Primary Format (*.tab) • MapInfo Data Interchange Format (*.mif) • Moss/MX Genio String Files (*.mos;*.inp) • Norwegian SOSI Spatial Info (*.sos) • NovaPoint Survey Data File (*.kof) • Open Street Map Files (*.osm) • Ordnance Survey MasterMap GZip (*.gz) • USGS Digital Line Graph (*.dlg;*.opt) The import tool can do a coordinate projection during import.  Simply assign source systems for each file (some auto-detected) and a target system.  If you don't see your format listed, contact us.  We are always looking to add additional formats to our list. Map Publish: Publish your drawing to KML (Google Earth) or HTM file using Google Maps or Leaflet to display the drawing in a browser.  Push the html file to your web server and anyone (with an internet connection) can view the map using any type of device or browser. Parking: Draw parking lot lines in rapid automation (see flash demo at left). PolyContour: Assign Elev: Assigns elevations to polyline contours by simply striking a line across the polylines.  Turn a large flat topo drawing into a workable 3D contour drawing in a matter of minutes! Delete Int: Deletes intermediate polyline contours.  Reduce a dataset for quicker processing when intermediate contours are not important. Elevations: Edit the elevations of polylines in a table with sorting and factor application commands. Group Tools: Group polyline contours under a name for other operations such as PolyContour Volumes, Stage Table and Stage Graph. Label: Label polyline contours using CAD text linetypes.  As the polyline is edited, the label moves with the changes. Layer Index: Assigns polyline contours to specific layers based on its elevation value.  Useful for layerizing a contour map with no (or improper) layer assignments. Shape Read: Import contours from shapefiles with elevations and optionally layers assigned. Volumes: Displays average contour area volumes from selected polylines, and can generate a stage storage graph from the table. Scale XYZ: Scales a selection set of objects with independent x,y,z scale factors. Symbols: A tool for managing both the symbols provided in MapWorks and your own user symbols. Previews: You can assign a scale factor from 10% to 200% to resize the DWG preview bitmaps. Details: A single click gives you operating system file details along with properties embedded in the drawing, as accessed from the DWGPROPS command. Symbols: A large collection of symbols in the areas of arrows, mining, points, road plan, shapes, trees, utility, and vehicles can be downloaded with a single click inside the symbol manager. Text Along: Draw text along linear objects such as lines, arcs, polylines, etc. Transform: Transform (rubbersheet) object coordinates using three known points on two systems using Affine, Helmert or Sixparm transforms. Trimble: Tool for importing symbols and layers from Trimble Feature Definition (FXL) files.

Introduction: The term figure is used to describe many different linear object types.  The tools are primarily designed to manipulate polylines but most work equally well with 3DPoly, LW/2DPoly, Spline and even Line and Arc objects. Audit: Audits a selection set of figures for problems such as self intersection, etc. Break: Breaks a selection set of figures at specified distances, elevations, vertices, etc. Clockwise: Set the direction of a selection set of figures to Clockwise or Counterclockwise. Close: Closes a selection set of figures by standard close or building close (adding the back corner). Connect: Automatically connect points to form new figures.  Specify description matches (like EP,BC,TC) to form multiples in a single process. Convert: Converts a selection set of figures to a designated type (such 2dPolylines with arcs, 3dPolylines, Splines, etc). Daylight: Draws daylight figure and extension lines at a specified slope to a selected surface. Delete Labels: Erases all labels on a selection set of figures. Difference: Returns differences between a primary figure and another figure or a surface.  Details including min/max, avg, median. Elevations: Raise, lower or flatten a selection set of figures.  Surface options to set at the centroid, avarage of elevations along or inside figure. Grade: Applies grading to any portion of a 3D figure, adjusts elevations based on various parameters such as elevations entered, grade, plane, or projection method. Label: When toggled on, displays tics & elevations at vertices, slopes and distance along segments.  Aids all built-in editing by showing changes from any tool used.  High/Low points are marked with suffixes like 123.45 HP and downhill is marked with arrows. Mark: Place a temporary marker at the centroid, common points, elevations, origin, or vertices of figures. Offsets: Linked: Multiple horizontal and vertical offsets created and linked to a figure.  If the figure changes by any operation (such as grip editing) the offsets are updated as well. Standard: Unlinked offsets of multiple figures using horz/vert distance, flow direction. Origin: Changes the origin point of a selected closed figure. Output: Output the name, northing, easting, elevation and radius values of a selection set to various targets (Excel, Word, files). Points: Reports points (number, coordinates, distance, offset) along figures within tolerances. Project: Project from a figure on a specified slope intersecting a surface.  Simply move around the figure picking points to generate 3dPolylines. Remove: Convert arcs to multi-chord approximations in a selections set. Report: Displays coordinates, direction/distance and curve details along with summary information. Restore: Restores true arc segments in figures with short segments approximating arcs. Scale: Tools to scale figures to specified area, length, etc. Select: Build a selection set of figures by area, length, elevation range and other parameters. Segment: Adjust: Adjusts one end of a figure segment to a specified slope distance, specified elevation, or intersection of a selected surface. Area Slide: Slides a selected segment in or out to obtain a designated area. Reverse: Reverses all segments of a selection set of figures. Straighten: Straightens segments between two picked points (by removing intermediate vertices). Snap: Snaps the vertices of a selection set of figures to nearby CogoPoint locations (with specified horz distance tolerance). Subdivide: Subdivides a four point figure, useful in PLSS systems. Summary: Generates a report of information on a selection set of figures, such as area and length, grades, elevations, etc. Traverse: Quickly draw figures primarily by distances using numerous angle options.   Very useful for house perimeters. Vertex: Commit: Commit secondary vertices on figures to primary vertices. Densify: Densify figures by specifying distance along segments.  Converts lines/arcs to polylines. Fillet3d: Fillets a selection set of figures with corner rounding options. Insert: Quickly insert vertices in an existing figure with various options. Linear: Removes muliple vertices (unneeded) in a virtual straight line based on deflection. TagEdit: Unique method to edit figure vertex elevations by changing temporary text tags. Weed: Weed (remove) unnecessary vertices in a selection set of figures.

Breakup: Breaks linear geometry (including polylines) and removes duplicate segments. Draw Setbacks: Creates setback offsets with separate values for front, side, and back. Deed Input: Allows the input of deed calls (bearing/distance) along with curve options.  All input is on the number pad for fast entry and the results are drawn as each segment is completed.  You can save your input at any time, make changes and replay the script in case of bad input. Manager: Used to create named parcels from unnamed geometry and enter/edit parcel properties. Report: Generates detailed parcel reports with user controlled columns. Shape Read: Reads an ESRI ShapeFile (Type Polygon) creating parcels and extended data. Shape Write: Saves parcel geometry and extended data into a ESRI ShapeFile (Type Polygon). Summary: Generates a consolidated report about multiple parcels. Reader: Open a RTF, HTM or TXT file containing a legal description (or paste text from clipboard) and with a single click, the bearings & distances are parsed to a grid with coordinates and closure calculated.  Most curves are detected, including support for radial-in, radial-out.  For stubborn segments, our curve calculator is one click away.  Once closure is acceptable another click draws the boundary in CAD. Writer: Creates highly customizable Legal Descriptions directly from LDT/C3D Parcels or CAD geometry. Contains a fully featured word processor, or you can export the description to Microsoft Word in a single click. Instant Results: Immediately upon selecting objects or a defined parcel, the results are shown to the right in our HTML compatible editor. Real Closure: This small box in the lower left of the dialog is potentially the most important. As each description is being generated, the calls created are collected to calculate closure. These calls are re-traversed, as if the calls were manually entered into a traverse routine to check closure. Objects Support: For quick legals, you can simply select a closed polyline or a collection of lines and arcs to form the boundary. Commencement Paths: When you need to describe how to get to the beginning of the description, you can choose a multi-segment polyline or a collection of lines and arcs. Acquire Descriptions: When the Legal Description Writer dialog appears, it collects all the potential descriptions from the drawing. This includes text and mtext objects, along with description attributes from point blocks. When the legal is being created, and it gets to the end of a line/curve segment, it looks through the potential description collection for the closest description found. If it's within the designated distance, it is placed in the body of the legal (using the [PntDesc] field). Expression Fields: Dozens of fields are defined to use as placeholders for everything from ArcLength to Time.  Click the details button to the left for the full list. Alignment Support: Fields are included allowing corners to reference a designated alignment.  You can include the alignment name, the side (left/right) and the station and offset in the description. Other: Number Words: Instead of using digits for the results, you can choose to use number words. Cardinal Directions: The [CardMaj] keyword returns four increments being Northerly, Easterly, Southerly, or Westerly. The [CardMin] keyword will return these four as well as Northeasterly, Southeasterly, Southwesterly, and Northwesterly. Defaults: Set default values for legal descriptions.  Easily build string templates by typing, then choose your fields with a pulldown that explains what each keyword is.  With our template design with fields, you have total control over the results. You control every word of every sentence, including subtle details like bold, underline, etc.

Introduction: AutoFormat: Optionally specify multiple description codes to match.  When matched, the program will format the points as you have determined including placing the insert and all point attributed on specific layers.  You can also scale (relative to the main insert scale) and rotate the point. Raw/Full: A Description Replacement Table allows for separate raw/full point descriptions.  In other words use IP in the raw description and it generates Iron Pin in the full description.  Point report contains optional columns for both. Add: Difference: Calculates elevation difference between points and a surface with an optional alignment reference..  Results can be added as extended data to the existing point, or new points created at the difference value. Radial: Add multiple points at a specified distance around a point. Single: Add single points based on known or picked coordinates. Interpolated: Creates all qualifying points on line using two points, beginning elevation and increment. Offsets on Line: Add multiple points that are offsets of a line defined by two points. On Grid: Add multiple points evenly spaced on a rectangular grid. On Intersections: Add multiple points at the intersections of linear geometry. On Line: Add multiple points (with interpolated elevation) between two points. On Objects: Add multiple points on the vertices of CAD objects. On Slope: Add a point at a picked location with elevation calculated at designated slope. Auto Draw: Automatically connects field points with 2D or 3D linework and symbols.  Generates 2DPoly, 2DPolyFit, 3DPoly, Spline or C3D feature objects as controlled by the user for each code. • Supports Autodesk Fieldbook, Carlson FTF, Eagle Point Coding, Trimble TGO, AASHTO SDMS Figure Code or Generic Connect methods. • Works straight from selected point objects in the drawing or an external point file. • Handles curve codes to form arc segments on 2DPolys or automatically graded segmented 3DPolys. • Establish reusable definition files for different projects or clients. Convert: Blocks: Converts blocks in the current drawing to system points. Explode: Converts by temporarily exploding objects and obtaining properties. Leaders: Converts leaders with associated or nearby text to system points. Nodes: Converts nodal objects (like circles, inserts, points) to system points. Text: Converts text objects in the drawing to application points with the ability to obtain the coordinates from adjacent geometry such as points, inserts, circles or even crossing lines. Display: Rotate at Node: Rotates selected points at their insertion point. Zoom All: Zooms the display to show all points. Zoom To: Zooms to a specified point with controllable scale factor. Edit: Average: Averages selected points with analysis allowing creation of average point. Clusters: Analyzes multiple clusters of points and removes all but one point in each cluster. Delete Dups: Deletes duplicates points based on same or close coordinates. Elevation Offset: Raises (or lowers) a selection set of points by a specified amount. GeomSnap: Moves points that have a position on or very near existing geometry to the designated snap (such as endpoint). Organize: Organize points into layers and/or groups while optionally assigning styles. Snap (Line): Moves points perpendicular to designated linear segments, snapping the point to the line. Snap (Geometry): Snaps points to nearby geometry with XYZ acquire options. Spreadsheet: Allows single or mass changes to point data in a spreadsheet grid. Transform: Performs rotation, scale and translate based on relationships between points. Export: Exports designated points to supported file formats, including a dedicated tool for exporting ESRI Shapefiles with point information. File: Combine: Combines multiple point files into a single target file. Compare: Compares two point files with detailed comparison report. Convert Multiple: Converts multiple point files to a designated target format. Convert Text: Converts a single text file (space, comma, tab delimited) to defined format. View/Print: Quickly view point files with details as file is clicked. Groups: Manage point groups including adding, deleting, renaming and more.  Quickly add/remove points by description match, elevation range, inside linear object or window, number range, etc. Harvest: Harvests all points from a folder (and subfolders) or selected files. The source files can be CAD drawing files or any point database format the application can read.  Output to CSV, KML for Google Earth or HTM reports including used/unused ranges and duplicate reports. Hyperlink: Generates hyperlinks on the point to image files referenced in the description. Import: Imports points from multiple point databases into the current drawing, including a dedicated tool for importing ESRI Shapefiles containing points.  If extended fields are present, the data becomes xdata on the points, easily edited using MapWorks extended data tools. Inquiry: Compare: Detailed comparison of designated points to those within search radius. Inverse: Inverses between points with distance, delta and slope details. Status: Returns information about the status of points (such as next number) in the current drawing. Table: Places an updateable point table in the drawing (table object) and fills it with qualifying points.  Optionally include lat/long columns or reference an alignment and show station/offsets. Report: Generates detailed point reports with user controlled columns.  Includes Lat/Lon and alignment station/offset fields. Save entire report as HTML or data table only to CSV, DBF, XML, etc.  Also include extended point data columns! Rotate: Rotate multiple points (in place) to angle of adjacent geometry. Stakeout: Generates a customizable report based on a specified setup and backsight point. Transparent: 'PN2 & 'PN3: At any CAD point prompt (such as circle center) enter the short transparent command and enter a single or range of points.  Draw any CAD linear object in seconds between points! 'SO2 & 'SO3: Select a linear object and enter a station/offset. Traverse: Allows typed entry of raw traverse data and importing from multiple formats.  User configurable editor allows quick and easy entry of traverses in angle right, azimuth, deflection, bearing & distance and more.  Define loops and calculate closure.  Plots resulting points and optional traverse and sideshot lines.  Imports raw data files. • DotSoft Raw Data (*.drd) • AASHTO SDMS Project (*.prj) • Autodesk Fieldbook (*.fbk) • Leica GSI Raw Data (*.gsi) • MinePro Loop (*.lup) • Sokkia SDR (*.sdr) • Topcon FC-6/GTS-7 (*.gts7) • Tripod Data Systems (*.rw5) Formats: Load Formats Save Formats • AGT ProCogo Files (*.cgo;*.cgx) • AASHTO SDMS Calculated File (*.cal) • Autodesk Land Desktop (*.mdb) • Autodesk Uploadable File (*.auf) • C&G Survey Coordinates (*.crd) • Carlson Survey/SurvCADD (*.crd) • CivilSoft Coordinates (*.pro) • Comma Separated Ascii (*.csv) • Excel OpenXML Spreadsheet (*.xlsx) • LandXML Industry Consortium (*.xml) • Leica GSI Coordinate Extraction (*.gsi) • Microsoft Excel Spreadsheets (*.xls) • Simplicity Point File (*.zak) • TDS Binary Coordinate Files (*.cr5) • TDS Binary JOB File (*.job) • Trimble JOB XML File (*.jxl) • AASHTO SDMS Calculated File (*.cal) • ASCII Text File (*.txt) • Autodesk Uploadable File (*.auf) • Carlson Survey/SurvCADD (*.crd) • CivilSoft Coordinates (*.pro) • Comma Separated Ascii (*.csv) • dBase Database File (*.dbf) • Drawing Exchange File (*.dxf) • Drawing Script File (*.scr) • Excel OpenXML Spreadsheet (*.xlsx) • ESRI Shape File (*.shp) • LandXML Industry Consortium (*.xml) • Microsoft Excel Spreadsheets (*.xls) • TDS (Tripod Data Systems) (*.cr5) If you don't see your format listed, contact us.  We are always looking to add additional formats to our list.

Systems: Includes support for all major systems, including LL27, LL84, NAD27, NAD83, HARN, etc. Optionally zoom to system extents, turn on GEOMARKERVISIBILITY, and set the drawing units (feet/meters) to match the selected system. Alt Coords: A system allowing entry and labeling of a second system.  For example if your current drawing is in state plane, you can easily enter values in lat/long or place updatable labels displaying the alternate system.  You can even copy the labels and the alternate coordinates update on demand. Set System: Set the current alternate coordinate system system code. Grid Draw: Draws a bound collection grid lines (or tics) and labels in an alternate coordinate system. Coord Entry: Enter an alternate coordinate any time CAD is prompting for a point using the transparent 'AC command. Label Add: Add an alternative coordinate label at multiple pick points with update options. Geom Report: Generate a report of selected objects with drawing and alternate coordinates (with or without elevations). PointUDP: Creates dynamically updated alternate coordinate point UDP on Cogo points. Block Place: Place inserts into the drawing at projected locations from files containing lat/long values. Additional fields in the file are mapped to block attributes. Convert Lat/Long: Reads lat/long text files (DD/DMS), projects to designated coordinate system and writes to point file. Coord Entry: Enter or pick coordinates which are projected and listed.  Convert between any two systems, even data shifts of NAD27 <> NAD83. DMS <> DD: Convert numeric values between degrees, minutes and seconds to degree decimal. Allows for quick copying to the clipboard or pasting into the CAD engines command prompt. Drawing Harvest: Harvests multiple drawing extents and properties (DWGPROPS), creates output drawings or reports. Export to Google Earth (KML) with preview thumbnail or web ready reports (HTM) and more. Excel Parse: Projects coordinates in an Excel spreadsheet and writes the projected values to adjacent columns. Find System: Helps determine a drawings coordinate system by finding those bounding a selected point. Also creates KML file to visually pin point system. GeoCoding: Uses the internet to determine Lat/long from entered address or obtain address information from pick point with position markers placed. GNIS Query: Uses the internet to query the Geographic Names Information System with plotting options. Google Maps: Various tools for Google Maps (in browser) such as display points, directions (two pick points), street view. GPS Track: Real time GPS tracking with marker and track data collection, voice guidance, alignment and surface information. Inverse: Geodetic Inverse, reports planar and spherical (haversine) bearing and distance. LandXML: Projects a LandXML file to a new selected coordinate system. Markers: Various tools to process GeoMarkers including quick add (on objects), convert nodal objects and reporting. Open Street Maps: Import: Imports OpenStreetMap geometry by simply windowing an area inside the drawing. Set View: Displays OpenStreetMap in your browser with the current drawings viewport.. Set System: Sets the coordinate system for current drawing.  This information is saved inside the drawing. Slippy Tiles: Draws polyline rectangles showing the extents of TMS slippy tiles at a specified zoom level. Tracker: Tracks the coordinates of the CAD cursor in multiple coordinate systems.  Optionally outputs coordinates on ID command ending. Transform: Projects a selection set of geometry from one coordinate system to another in the current drawing.

Analysis: Contour: Create contours from drawing objects, triangulation or grid files with options.  The resulting geometry can be polylines or splines placed into separate designated major/minor layers.  Optionally label contours automatically with linetypes that don't break the contour.  Choose from two methods, triangulation (faster) or rectangular grid (smoother). Convert Sections: Convert cross sections to plan view 3dPolys along an alignment and optional surface. Requires a centerline alignment and sections (as polylines). Drape Objs: Drapes a selection set of objects (3DFACE, ARC, CIRCLE, ELLIPSE, IMAGE (AutoCAD only), INSERT, LINE, MTEXT, POINT, POLYLINE, SPLINE, or TEXT) onto a surface. 3dFaces: Draw Normals: Draw line objects representing the face normals of triangular faces. Elevations: Flatten or raise/lower selected faces. Edge Control: Temporarily display all edges or turn on/off edges of a selection set. Add Location: Creates a properly elevated Cogo point at the picked point, based on the surrounding 3dTriangle. Offsets: Offset selected 3dFaces. Point: Snaps the closest vertices of faces to a picked point. Set Direction: Set the direction of a selection set to clockwise or counterclockwise. Stats: Returns statistics (including slope area) a selection set. SubDivide: Subdivides selected 3dFaces into smaller units for smoothing. Export: Quickly export multiple selected surfaces to separate files. Convert: Reads a grid, tin, or csv points file and converts to any supported format. Grade Poly: Generates a 3DPoly at a designed grade on a surface.  After picking the initial point it shows possible directions (there is usually two) and prompt for the starting direction.  When the looking forward grade cannot be determined it prompts for direction which allows for switchbacks on steep slopes. Grade Vectors: Generates 3D Vectors and information from block insert pointers and attributes. Grid Create: Creates a grid file from drawing geometry or existing TIN file.  Optionally process multiple layers to create multiple surfaces. Grid Editor: Allows opening, single or mass edits in our spreadsheet, and saving of a grid surface. Import" Imports multiple surfaces (TIN or GRID) from multiple selected files. Label Contours: Labels contours using options such as ends, individual or multiple. The mtext objects generated are field based meaning you can move or copy and the value will change on the next regen. Using background mask, it will hide the underlying contour without any damage. Manager: A collection of tools to manipulate project surfaces.  Allows for statistics, exporting of Tins, Grids, and Points, etc. File Review: Review surface files showing specifications with zoom, show, label options. Mass Points: Import multiple Lidar files (including binary LAS, LAZ (Compressed LAS), Leica Cyclone*.PTS, PCD & XYZ/XYZi) or any supported surface format with data reducing constraints.  Projects points between coordinate systems. Isolate by bounding object, elevation ranges, and interval.  Reduces data burden by as much as 90%+ without sacrificing quality.  Output to drawing points, external file or directly to a surface. Additional Lidar tools include: Combine: Combines multiple lidar files into a single compressed LAZ file. Convert: Convert multiple surface file formats to Lidar LAZ files. Color: Assigns colors to lidar points based on loaded aerial images. Crop: Crops a LAS/LAZ file at the extents of a selected object, creating a new file. Edit: Various tools to edit LAS/LAZ files inside the CAD engine. Ground: Uses downloaded reference surface to add ground classifications to Lidar files. List: Detailed report in browser of point count, coordinate window, elevation min/max, etc. Make: Creates a lidar file from points on entities (including surfaces). Pads: Generates polylines of areas where holes exist in lidar such as bldg pads. Plot: Plots selected lidar files as point objects in the drawing. Project: Projects lidar from a source to target coordinate system, saves as a different file name. Rotate: Rotates a Lidar file based on a rotation angle. Scale: Scales a Lidar file in XY, Z or ZYZ based on parameters. Split: Splits a single large lidar tile into multiple smaller files. Tiles: Quickly draw and label the 3D bounding box of a selection of binary Lidar LAS/LAZ files. Pad Design: Generates a 3d (building) pad from a simple polyline at the desired elevation, including automatic daylighting to existing ground.  Simply specify parameters and select the geometry. Pond Spill: Determines contours up to spill point and creates a polycontour group ready for stage table or graphs. Plot: Draws a grid or triangulation surface as Points, 3DLines, 3DFaces, or a 3DPolymesh with many options including limit boundaries, borders, elevation ranges, etc.  Also project coordinates between systems and do vertical exaggeration, detects many file coordinate systems automatically. Processor: Processes one or more surfaces to create other surfaces by factors or elevation analysis (min elev, etc). Solid Make: Creates a 3dSolid using relative depth, absolute elevation, or a second surface. Solid Split: Split 3dSolids into two surfaces at specified elevation. Spot Anno: Draws spot elevations, slope arrows, etc.  Includes the ability to use separate colors for positive/negative values on difference grids. Template Design: Design 3D features such as roadways & ditches using section templates.  Simply draw your section in a block definition and this tool will project it along your path object to form a 3D geometry model.  Edge rays are automatically trimmed at the intersection of the surface. Tin Create: Creates a triangulated irregular network file from drawing geometry. Volumes: Calculate grid based volumes from CAD layers with printable report. Web Elevations: Creates a surface (or insert/export points) with the elevations returned by the Bing, Google, or the USGS Elevation Service. Other Tools: Tag Boundaries: Tag objects as exterior/interior boundaries to limit extents on surface models and contours, etc. Tag Breaklines: Tag objects as hard or soft breaklines to constrain surface models and contours, etc. Export Points: Export unique xyz points of a select selection set of objects to a CSV file. Grid Reconstruct: Recreate a grid file from ortho drawing geometry such as points, lines, or 3dfaces. TIN Reconstruct: Recreates a TIN file from drawing geometry such as PolyMeshes or 3dFaces. Formats: Load Cloud Formats Save Cloud Formats • ASTM E57 Point Cloud (*.e57) • Autodesk Point Cloud File (*.pcg) • Comma Separated X,Y,Z Values (*.csv) • Generic XYZ Mass Points (*.xyz) • Generic XYZI Mass Points (*.xyzi) • Leica Cyclone Point Scan (*.pts) • Lidar Light Detection And Ranging (*.las) • LasZip Compressed Lidar (*.laz) • Point Cloud Data Ascii (*.pcd) • Topcon Point Cloud File (*.cl3) • Comma Separated X,Y,Z Values (*.csv) • Generic XYZ Mass Points (*.xyz) • Generic XYZI Mass Points (*.xyzi) • Leica Cyclone Point Scan (*.pts) • Lidar Light Detection And Ranging (*.las) • LasZip Compressed Lidar (*.laz) • Point Cloud Data Ascii (*.pcd) • Topcon Point Cloud File (*.cl3) Load Grid Formats Save Grid Formats • Carlson SurvCADD Grid (*.grd) • ENVI Raster Band Interleaved (*.bil) • Erdas Imagine Raster Image (*.img) • ESRI ArcGrid Floating Point (*.adf) • ESRI ArcView Ascii Grid (*.asc) • ESRI ArcView Binary Grid (*.flt) • GeoReferenced Tagged Image Format (*.tif) • Grid Exchange File (*.gxf) • MapWorks Surface Grid (*.msg) • NGA Digital Terrain Elev Data Level 0-2 (*.dt#) • SAGA Binary Grid (*.sdat) • Surfer Ascii/Binary Grid (*.grd) • USGS Digital Elevation Model (*.dem) • VTP Binary Terrain (*.bt) • Carlson SurvCADD Grid (*.grd) • Comma Separated Values XYZ (*.csv) • Drawing Exchange File (*.dxf) • ENVI Raster Band Interleaved (*.bil) • Erdas Imagine Raster Image (*.img) • ESRI ArcView Ascii Grid (*.agr) • ESRI ArcView Binary Grid (*.flt) • GeoReferenced Tagged Image Format (*.tif) • Grid Exchange File (*.gxf) • MapWorks Surface Grid (*.msg) • SAGA Binary Grid (*.sdat) • Surfer Ascii/Binary Grid (*.grd) • VTP Binary Terrain (*.bt) Load TIN Formats Save TIN Formats • Autodesk Binary TIN/PNT (*.tin) • Carlson Binary TIN (*.tin) • ESRI ADF TinSurface (tdenv.adf) • ESRI ArcInfo UnGenTin (*.net) • GoCAD Tsurf Format (*.ts) • LandXML Single Surface (*.xml) • Leica Terrain Model (*.trm) • MapWorks Surface Tin (*.mst) • Topcon Surface Ascii Tin (*.tn3) • Trimble Tin Model (*.ttm) • VTP Intermediate Tin (*.itf) • Comma Separated Values XYZ (*.csv) • Drawing Exchange File (*.dxf) • ESRI ArcInfo UnGenTin (*.net) • GoCAD Tsurf Format (*.ts) • LandXML Single Surface (*.xml) • MapWorks Surface Tin (*.mst) • Topcon Surface Ascii Tin (*.tn3) • VTP Intermediate Tin (*.itf) If you don't see your format listed, contact us.  We are always looking to add additional formats to our list.

desrosiersgristordenty.blogspot.com

Source: https://www.dotsoft.com/mapworks.htm

Share this post